721-.rar Site

Set the output device to the correct found in your computer's Device Manager. Ensure the Baud Rate is set to 9600 . VinylMaster Setup :

or depending on the model version) from the manufacturer or reseller site like ukoter.co.uk.

: Always use the "Test" button on the cutter or the "Area Test" in your software to ensure the carriage moves correctly before wasting material. Vinyl U.S. Cutter set up MH 721-MK2 28" 721-.rar

typically uses commands. You must match the software settings to the cutter's hardware settings. SignCut Setup : Select "Refine" as the manufacturer and " " as the model.

model and choose "Direct USB" or "Direct COM" depending on your cable. 4. Running Your First Cut Set the output device to the correct found

: Download the "MH series USB driver" (often listed as

If you are using the USB connection, you must install the proper drivers to create a virtual COM port. : Always use the "Test" button on the

: Use the arrow keys on the cutter's control panel to move the blade to your starting point and press "Origin" or "Local" to set the zero point.