Copy the extracted firmware file (usually named MstarUpgrade.bin or similar) directly to the of the USB (do not put it in a folder). đź› Installation Methods
Navigate to > Settings > System > Software Update > By USB . The TV should detect the file and ask to begin the update. Method 2: Forced Flash (For Boot Loops/Black Screens) Power off the TV and unplug the power cord. Insert the USB drive into the TV's USB 2.0 port. Copy the extracted firmware file (usually named MstarUpgrade
: Do not turn off the power or remove the USB during this process, as it can permanently damage the main board. 🔍 Finding the Download Link Firmware for Condor models using the JUC7.820.00169579 Method 2: Forced Flash (For Boot Loops/Black Screens)
: Right-click on the first part (Part 01) and select "Extract Here." This will automatically combine all parts into a single .bin or .img firmware file. Prepare a USB Drive : Use a USB drive with at least 1GB of storage. Format it to FAT32 . 🔍 Finding the Download Link Firmware for Condor
: Multi-part archives like yours cannot be opened individually. You must download all parts (Part 01, Part 02, etc.) into the same folder on your computer.
To download and install the (specifically Part 02), you will typically need to locate the multi-part archive from technical forums or repository sites, as manufacturers often split large firmware files into several parts (e.g., .part01.rar, .part02.rar) for easier hosting. đź“Ą Downloading & Preparing the Files
Continue holding until you see an "Upgrading" bar or the power indicator starts flashing.