Typically runs a basic Android-based smart TV interface. How to Install This Firmware

If you have gathered all parts and extracted the final file, the installation generally follows these steps: Use a thumb drive formatted to FAT32 .

Place the extracted firmware file (usually named allinstall_...bin or similar) into the root directory of the USB—do not put it in a folder. Insert and Flash: Turn off the TV. Insert the USB drive into the TV's USB port.

The TV should light up with a "Software Updating" progress bar. Do not turn off the power during this time, as it can permanently damage (brick) the board. Finding the Download

TV main board, specifically a version intended for system devices with a 1920x1080 (Full HD) resolution.

The main board is commonly found in various smart TV brands like , Stream System , and other budget LED/LCD televisions. Firmware for these boards is typically distributed as split compressed files (e.g., .part01, .part02, .part03 ) because the original .bin or .img files are too large for certain hosting platforms. Important Note on "Part03.rar"

To successfully use this file, you must download (Part 01, Part 02, etc.) into the same folder. Extracting only "Part03.rar" will result in an error; the extraction software needs every segment to reconstruct the full firmware image. Board Specifications Model: MSD6A348-T8C2 Application: Used in 40-inch and 43-inch LED TVs. Resolution Support: 1920x1080 (FHD).