: To avoid warping the frame, tighten all bolts in a sequential, circular pattern rather than fully tightening one at a time.

: The main tabletop (laminated surface) is attached to the frame. A shelf bracket is typically secured to the underside of the surface using #10-¾” screws. Support & Power Integration :

: Ensure the battery voltage does not drop below 10.8V to maintain operation. Accessory Installation :

: Must be mounted to the underside of the shelf before the shelf is attached to the mast.

The assembly typically focuses on a modular, heavy-duty frame designed to hold power kits and industrial equipment. According to the NB Series Assembly Manual , the process generally follows these steps:

: Always ensure the table is on a flat, level surface and that casters are locked before use.

Nb - Table Assembly (05-25-22).mp4 -

: To avoid warping the frame, tighten all bolts in a sequential, circular pattern rather than fully tightening one at a time.

: The main tabletop (laminated surface) is attached to the frame. A shelf bracket is typically secured to the underside of the surface using #10-¾” screws. Support & Power Integration : NB - Table Assembly (05-25-22).mp4

: Ensure the battery voltage does not drop below 10.8V to maintain operation. Accessory Installation : : To avoid warping the frame, tighten all

: Must be mounted to the underside of the shelf before the shelf is attached to the mast. Support & Power Integration : : Ensure the

: Always ensure the table is on a flat, level surface and that casters are locked before use.